design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer aluminum electrolytic capacitors w1 l p1 w2 w2 p4 h p2 p3 p1 + C + C cap. polarity bar (positive) r.v. code lot no. large capacitance (560 f max.) low esr (4.5 m , 6 m ) low esl (3-terminals : 50 % less than 2-terminals) high ripple current (8500 mar.m.s. max.) rohs compliance, halogen free surface mount type series : lx (low esr / low esl products) features speci cations series lx category temp. range C55 c to +105 c rated voltage range 2 v.dc to 2.5 v.dc nominal cap.range 330 f to 560 f capacitance tolerance 20 % (120 hz/+20 c) dc leakage cur rent i < 0.1 cv (a) 2 minutes dissipation factor (tan d ) < 0.06 (120 hz/+20 c) surge voltage (v.dc) rated voltage 1.25 (15 c to 35 c) endurance +105 c, 2000 h, rated voltage applied capacitance change within 20 % of the initial value tan d < 2 times of the initial limit dc leakage cur rent < 3 times of the initial limit damp heat (steady state) +60 c, 90 %, 500 h, no-applied voltage capacitance change of initial measurd val ue 2 v.dc to 2.5 v.dc +70 %, C20 % tan d < 2 times of the initial limit dc leakage current within the initial limit marking dimensions (not to scale) externals of ? gure are the reference. rated voltage mark d 2 v.dc e 2.5 v.dc unit : mm series l0.2 w10.2 w20.1 h0.1 p10.3 p20.1 p30.2 p40.2 lx 7.3 4.3 2.4 1.9 1.3 1.1 0.7 1.4 nov. 2015 05 downloaded from: http:///
design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer aluminum electrolytic capacitors reflow characteristics list 1: ripple current (100 khz/ +45c ), 2: esr (100 khz/+20 c) 3: please refer to the page of mounting speci? cations. 4: please contact us when 500 pcs packing is necessary. series rated voltage (v.dc) capacitance (20 %) (f) case size (mm) speci? cation part number min. 4 packaging qty (pcs) lwh 1 ripple current (mar.m.s.) 2 esr (m max.) lx 2 330 7.3 4.3 1.9 7500 6 eeflx0d331r 3500 7.3 4.3 1.9 8500 4.5 eeflx0d331r4 3500 470 7.3 4.3 1.9 7500 6 eeflx0d471r 3500 7.3 4.3 1.9 8500 4.5 eeflx0d471r4 3500 560 7.3 4.3 1.9 7500 6 eeflx0d561r 3500 7.3 4.3 1.9 8500 4.5 eeflx0d561r4 3500 2.5 330 7.3 4.3 1.9 7500 6 eeflx0e331r 3500 7.3 4.3 1.9 8500 4.5 eeflx0e331r4 3500 470 7.3 4.3 1.9 7500 6 eeflx0e471r 3500 7.3 4.3 1.9 8500 4.5 eeflx0e471r4 3500 temperature compensation multipliers for ripple current temp. t < 45 c 45 c < t < 85 c 85 c < t < 105 c coef? cient 1.0 0.7 0.25 nov. 2015 05 downloaded from: http:///
if you want to use our products described in this onlin e catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially caus e personal injury (e.g. aircraft and aerospace equipment, traffic and transportat ion equipment, combustion equipment, medical equipment, accident prevention, anti-crime eq uipment, and/or safety equipment), it is necessary to verify whether the specificatio ns of our products fit to such applications. please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. the quality and performance of our products as described in this online catalog only apply to our products when used in isolation. therefore, please en sure you evaluate and verify our products under the specific circumstances in which our pr oducts are assembled in your own products and in which our products will actually be used. if you use our products in equipment that requires a h igh degree of reliability, regardless of the application, it is recommended that you set up protectio n circuits and redundancy circuits in order to ensure safety of your equipment. the products and product specifications described in this online catalog are subject to change for improvement without prior notice. therefore, pleas e be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, pu rchase, or use our products. the technical information in this online catalog provides example s of our products' typical operations and application circuits. we do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. if any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and ex port control, shall be observed. the switchover date for compliance with the rohs directive /reach regulations varies depending on the part number or series of our products. when you use the inventory of our products for which it is unc lear whether those products are compliant with the rohs directive/reach regulation, please se lect "sales inquiry" in the website inquiry form and contact us. we do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. guidelines and precautions regarding the described in this online catalog. downloaded from: http:///
|
